Camplux 1.58GPM Portable Gas Water Heater Instant Hot Shower & Dishes Outdoors

Description: With low water pressure ignition, this heater can function with 3.0 PSI of water pressure. Aesthetically pleasing and simple design features with folding handle for easy portability. Temperature raise is 114.8℉(46℃) and the minimum temperature raise is 46.4℉( 8℃) 1.58 gallons per minute of hot water output, delivers endless hot water with optimal energy efficiency! Dry combustion protection,flame failure device, anti-freezing protection and oxygen depletion safety shutoff protection. Product Description 1. The Camplux BD158 is an excellent choice for tiny houses, cabins, lodges, apartments, outdoor showers, bathhouses, campsites, and much more.2. Could possibly be used in 5th wheels, RV, or campers if you have enough room for proper combustion air and venting and a flue pipe is installed additionally.3. Ignition is provided by 2 D cell batteries which means electricity isn’t required to power the unit. (batteries not included）4. The ideal low water pressure operating range for the Camplux BD158 is 3.0-10.0 PSI, works easily with great performance.5. The operating propane gas pressure is 0.4PSI with maximum power output 41,000btu/hour.6. The system also works with a 12-volt pump to get the desired pressure. Specification Details Gas supply: Liquid PropaneIgnition: 2D Batteries Powered (Package not included)Batteries Voltage: 3V DCBattery run time: About 6 MonthsProduct weight: 15.6 PoundsProduct Dimension: 11.8 × 5.1 × 17.3 inches (W×D×H)Water Flow Range: 0.6-1.58 GPMTemp. Rise Range: 50~122 °FWater Pressure Range: 3.0-110.0 PSIMaximum power output: 41,000 BTU/hourGas Fitting: 3/8" Male FlareWater Fittings: 1/2" G Thread Size Easy to UseGet the instant portable gas hot water system that's easy to set up and use!1. Hang the propane gas water heater using the handle provided, or install the water heater on the wall.2. Connect the gas cylinder with the supplied gas hose and regulator.3. Connect the shower hose and shower head to the hot water outlet.4. Connect the water hose to the water inlet.5. Insert 2 "D" cell batteries.6. Enjoy instant hot water Q & A Q: Can it be used in high elevations?A: Yes, but for areas above 2,000 feet, suggest checking if there is sufficient water supplyPS: For every 1,000 feet in elevation, the efficiency of the water heater will decrease by 10% Q: How to power the water pump?A: 12V DC required. Connect the alligator clip cable to the power supply's terminals or the cigarette lighter cable directly to the car's power Q: Why is the shower leaking on first use?A: Check the gasket connection with the shower head before use Q: Why is the outgoing water so hot or not hot?A: Water temperature varies from water inlet temperature and gas flow. This may cause a slight delay in temperature change. Please adjust in patience

Price: 169.99 USD

Location: Bell, California

End Time: 2024-12-25T05:54:10.000Z

Shipping Cost: 0 USD