CBN 14/10μ (F1500) Stone for Apex Edge Pro, Hapstone, TSprof Sharpener System

Description: Normal 0 false false false EN-US X-NONE X-NONE Diamond & CBN-stones from Ukraine have some difficulties: ***** Since the PDTools (UKRAINE) factory is experiencing difficulties of war, the plant reserves the right not to paint aluminum backing plates for sharpening stones, so some sharpening stones from Ukraine may not be painted and may be differ from the photos, but HOWEVER THIS DOES NOT AFFECT THE PERFORMANCE CHARACTERISTICS OF THEM OF ABRASIVE MATERIAL inside THE SHARPENING STONES! Attention: The guarantee of the factory products from Poltava city PDTools (UKRAINE) is their gluing on a 4 mm backing plates in the factory way - for other sharpening bars, glued on a 3 mm backing plates (Hapstone, Gritomatic etc.), the factory DOES NOT BEAR RESPONSIBILITY AND DOES NOT GIVE a factory guarantee for those sharpening stones: Attention: Warning: PDTools trademark on the back of the aluminum's backing blanks 5/32” = 4 mm (See Attached picture from their booklet) high, can guarantee that you have purchased the PJSC Poltava Diamond Tools Superabrasives factory’s product for the American market from the Authorized dealer in North America (See Attached photo of our certificate)! ******* https://www.youtube.com/watch?v=jAk0VASJx0k ******* https://www.youtube.com/watch?v=qtsX5jxz6g8 ******* https://www.youtube.com/watch?v=3g3pABq_tjM (Explained: the differences between CBN metallic and Diamond resin) ******* https://www.youtube.com/watch?v=B3M8Xn-FXiA&t=5s ******* FeedBaсk ******* From the previous Buyer 😊from Singapore😊: denebman (17) US $ 283.00 This is the first time I have used metallic CBN stone. Sharpened a few knives in CPM 3V, 154 CPM, carbon steel and Sandvik's (14c28n). The overall feedback is excellent, the stone just kept eating up steel without losing any aggressiveness. Reprofiling is a breeze. I will come back and order a full-sized set (25mm) in the near future! The BASIC Set / 17mm: CBN-stone Apex Edge Pro / Ganzo / Ruixin / TSPROF Hapstone (# 175506636648) ! Mr. Efim Dreer (Canada) - 37 years on the sharpening field, creator of the Flip-in-Sharp rotary mechanism, which allows you to sharpen a knife without removing it from the clamps, said (See the picture): - Yes, guys! Now, in nowadays, CBN stones are the best in the world! Of course, it’s a pity - the era of natural stones like Arkansas, Washite, Lynn Idwall, etc. has passed. Yes, CBN stones do not require frequent leveling and I flatten them no more than once every year and a half... ! : https://youtu.be/B3M8Xn-FXiA?si=PkROKD0h7Hn2N-Hi ! Mr. Michel Lovett (a friend & the partner of Bob Loveless) wrote me response under this video: Mr. Levitt Now that I've had a chance to really try these stones, I'm very impressed! I have a lot of diamond stones here. Simple plated stones, Venev Diamond Stones that are a nonmetallic binder along with Jande and Columbia Gorge. Nothing, and I mean nothing cuts like these stones. Fast, but the finish they leave on the blade is crisp like I've never seen before. Even the coarser grits such as the 550 and 650 grits shave well, smooth in paper slicing but have an aggressive nature that must be felt to believe. So aggressive in fact that care must be taken around the edges. Not for the careless user! I will be ordering more of these stones. The ones shown here are for fixed angle sharpeners, but I do need to pick up a couple of bench stones. It's on the to do list! I can't thank you enough for pepping these stones for me. I already have many hours using them on from D-2, 154-cpm, to M-4 and S90V. These stones are like the Honey Badger. They don't care! Nothing is too tough for the. :<) KnifeMaker/Mike/Retired after over 47+ years in the Craft. ! : ! Mr. MICHAIL LOVETT from the TAXES (USA) - See the pictures: subhilt9 (141) US $ 64.04 ! Wonderful Company in a very unique and innovative industry. The workmanship is outstanding and world leading in their field. I look forward to seeing more of their offerings in Industry here in the U.S. Customer communication is fast and courteous and they are willing to answer questions personally. Rare in today's World. I will be extensively testing their offerings for Knife Makers, Collectors, and users. KnifeMaker/Medically retired after over 47+ years in the Shop. 40/28μ (F 550) 17mm: CBN-stone Apex Edge Pro, Ganzo Ruixin Pro, TSPROF Hapstone (# 395199454211) ! Mr. MICHAIL LOVETT from the TAXES (USA) - See the pictures: subhilt9 (141) US $ 64.04 ! We Are Selling the Original PDTools Product in North America (See Our Certificate on Photos): (Guys, Beware of Scammers! https://www.youtube.com/watch?v=r63OK8DQyCg, https://youtu.be/qtsX5jxz6g8. - Example. Not for selling. The actual product can be seen in the pictures on eBay. This knife was sharpening by PDTools CBN-stone (video from some our buyer) - https://www.youtube.com/shorts/DtGegwq2hNw.) Because Of We Are the Official Dealer of the PDT-Factory, Ukraine in North and South America (See Attached Photos). Cubic Boron Nitride (CBN) is the Micro powder Super abrasive. Knife Knowledge: CBN vs Diamonds - Whetstone built to do the job. Everything you need to know - https://youtu.be/8DD2yQj7K8E - In video CBN - stone bonded by resin and we sell MUCH BETTER - these stones are bonded by a copper-tin metal. ONLY the PDT factory (Ukraine, Poltava) has this technology in the World! Material & abrasive: CBN - cubic boron nitride. It has the best cost/productivity ratio for processing of STEELS, comparing to diamond and cheaper stones. CBN stones are similar in qualities to Japanese wet stones, but have ten times longer working life. CBN is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite. Metal bond Will last forever, although nothing is forever. Concentration 100%.Do not waste your money on cheaper stones with lower/unknown concentrations. PreparationStones with grits finer 3 microns either require preparation on cast iron plates, or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well. Use and cleaning (unclogging)Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean (unclog) with alcohol and toothbrush. Maintenance is only needed every year or two to flatten stone or "open up" abrasive grains. In 1-2 years you may need to flatten stone, on the glass with silicon oxide powder or iron oxide - grinding is carried out using powder of the same grit as the will be leveled sharpening stone (!). Tips:Question from: marbalie-0 (148) Are these stones resin bonded or electroplated? Not really seeing specifics.Answer: These stones are bonded by a copper-tin metal. This distinguishes them from Chinese (bonded by electroplated) and from European ones (on a resin bond). That is, cubic nitride boride (CBN) is added to boiling copper-tin lava and it is "baked" in a metal base. This technology is available ONLY at the Poltava Diamond Tools factory (!), which makes the sharpening process with these types of stones the strongest and most durable in the WORLD - you can sharpen up to 77,000 knives (depending on the Grit size) with one bar!For Example: A lot of people make mistake between CBN-stones and Diamond: FeedBaсkFrom the previous Buyer from the USA: innuendos (1117) US $ 515.00 AMAZING stones - they remove steel fast, with minimal effort. I like the fact that the abrasive is bonded in metal (copper + tin) and will resist dishing a lot better than resin (Note from seller: ONLY PDTools, Ukraine CAN PRODUCE the CBN-stone IN THE COPPER+TIN BOILING LAVA IN THE WORLD IN NOWADAY! 😊). I have sharpened 3 knives and for D2 steel I only needed up to the 650 Grit to produce a razor's edge - google "PDT CBN Stones" (Note from seller: PDTools, Ukraine CBN-stone😊) and watch video or search title at YouTube. These left my cheaper diamond stones in the dust. This seller is very knowledgeable and stands behind his products. A great seller!The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (# 175387035682)FeedBaсkFrom the previous Buyer from the USA: reno_raines99_5 (84) US $ 515.00 I've had these for a week now and they are the best diamond stones (Note from seller: This is the CBN-stone😊) I have tried. They are expensive and may not be for everyone but if you are someone who does a lot of sharpening and doesn't want to keep replacing the diamond stones or just wants the best product then this is for you.The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (#175387035682)ANYONE WHO BOUGHT THE FIRST CBN-Stone, WILL RETURN TO US FOR SURE FOR THE SECOND ONE!*************FeedBaсkFrom the previous Buyer 😊from Singapore😊: denebman (17) US $ 283.00This is the first time I use metallic CBN stone. Sharpened few knives in CPM 3V, 154 cpm, carbon steel and sandvics (14c28n). The overall feedback is excellent, the stone just kept eating up steels without lossing any aggressiveness. Reprofiling is a breeze. I will come back and order a full sized set (25mm) in the near future!The BASIC Set / 17mm: CBN-stone Apex Edge Pro / Ganzo / Ruixin / TSPROF Hapstone (# 175506636648)CBN 14/10μ (F1500) Stone for Apex Edge Pro, TSPROF Sharpening SystemsWorking area: 148.5 mm x 23.9 mm x 7.0 (!) mmBronze bonding Made in Ukraine NEW Please email any questions before bidding. *** eBay Feedback: Feedback will be given in return for your feedback. Your satisfaction is important to us. If you do not feel comfortable giving us a 5-star positive feedback rating, please contact us before leaving any feedback so that we can make things right. If you would like to purchase this item along with any other items we have listed, we gladly combine shipping. All items come from a smoke free home.We do our best to accurately and honestly describe everything we sell. If there is a defect that we are aware of, we will include it in the description the best that we can. If you have any questions of any item, please e-mail me before bidding. Thank You.

Price: 90 USD

Location: Tarzana, California

End Time: 2024-08-12T22:53:17.000Z

Shipping Cost: 4.63 USD