K-Tuned Intake Manifold Adapter Plate K24 Manifolds onto K24 Coolant Adapter New

Description: Product Information:The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typically part of the intake manifold which isn’t on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when using the adapter. The adapter lowers intake air temps as coolant is no longer connected the intake manifold. Hondata has shown that intake air density will drop 1% for every 5°F increase in intake temperature. This is wasted power that can easily be gained back by using the adapter. The adapter also features a 1/8 NPT port for a coolant temp sensor commonly used in swap cars. The Intake Manifold Adapter can be installed either using our spring loaded tab or by tapping the head. We use Honda Bond or similar gasket maker as it provides a strong seal and when using the spring loaded tab when the adapter isn’t under pressure there will be no chance of leak. The spring loaded tab holds the adapter down with constant spring pressure to ensure a tight fit and seal. The other option is using the provided blind hole you can easily tap the head for the second hole. Tapping the head will require a 6.5mm drill bit (to finish the blind hole in the adapter), 5mm drill bit (to drill the head), and M6x1.0 Tap. Quick Instructions Begin by using the 6.5mm or ¼ drill bit to finish the blind hole in the adapter. You then want to install the manifold and adapter on the head. This will ensure you are properly positioning the hole. Once you have marked where you want to drill remove the manifold and adapter. Place tape or plug the holes on the head for intake and coolant to prevent anything from getting inside. You will be tapping at least 11mm depth (the depth of the bolt) but shouldn’t need more than 14mm of depth. You can apply tape on the drill bit to ensure not to drill too deep. Once you drill the hole you will run your tap. Be careful not to tap too deep. You can start the thread with a standard tap but you should finish it using a bottoming tap. This will allow the bolt to use most of the tapped hole. Slowly start to tap the head and check fitment of your adapter often. You want the adapter to hold snug but not tap the hole to far. Applications: K20 Intake Manifold onto K24 Head Shipping:We may either ship through USPS, UPS, or FedEx at our own discretion.Products are usually shipped out Monday – Friday. Please contact us through email for assistance regarding other shipping methods. Return policy: When receiving your package, please open all of the boxes immediately to check if all the contents are inside and not damaged. All damaged or defective items must be reported within 2 business days from the day the packaged is delivered. If the package appears to be damaged on the outside, please refuse to accept it from the carrier; or please make sure when signing the shipper's proof-of-delivery slip, you include a note stating that the package is or appears damaged. If you do accept a damaged shipment, please inform us immediately. Depending on the product and where/how it was shipped, it may be necessary for you to deal with the carrier. If the product received is defective, a replacement will be sent as soon as possible. If you decide to return the defective item, rather than replace it, a restocking fee will be assessed (15-50% depending on the item) and your original shipping and processing charges will not be refunded. Also, returned products must be in its original packaging which allows us to re-sell the product. We will refuse any damaged or products that are not in good condition. If after 30 days of receiving your product, it proves to be defective, we would like for you to deal with the manufacturer. They will inform you on how to proceed based on their policies. If you are unhappy in any way, please contact us through eBay messages. We will provide you instructions on how and where to return the product.

Price: 102.85 USD

Location: Covina, California

End Time: 2024-07-26T06:52:45.000Z

Shipping Cost: 0 USD