Description: Details Item Description The Tucked Engine Harness is designed as a high quality replacement 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC). Will fit Following Models K-Swap Cars02-04 RSX Type S 02-04 RSX Base 01-05 Civic EP3 (Type S or K24 Swap) Note: *Will NOT fit RHD cars or RWD cars. Features: All plugs included except EVAP and ACCovering is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F) SAE Certified Automotive Grade WiringAll plugs are labeledTucked designHarness runs over valve cover (Can be covered with coil pack cover)Injector wiring runs from under manifold between middle runners.Ground wire relocated to stud under coil pack cover (instead of front of the valve cover)Includes single wire temp sensor wire (For k-swap cars stock cluster)3 Aux wires run from ECU to under intake manifold. Two ECU pins pre-installed.Wiring long enough for both VSS low frequency or high frequency (High Frequency transmissions will require repining plug and slight modification to VSS)Each harness is inspected and tested before shipping.RSX injectors plugs come standard Shipping PolicyPayment MethodReturns PolicyShipping Policy -Please leave us your full name, your telephone number and detailed address when ordering. -We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order. -We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.Payment Method -We accept PayPal only. -All major credit cards are accepted through secure payment processor PayPal. -Payment must be received within 4 business days of auction closing.Returns Policy -We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price. -With these parts you can replace your defective parts simply plug and play. -Our warranty is valid for max. 24 months without mileage limitation. -Please compare carefully with Photos or OE number before purchasing the part. -Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.Product ViewDetails Item Description The Tucked Engine Harness is designed as a high quality replacement 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC). Will fit Following Models K-Swap Cars02-04 RSX Type S 02-04 RSX Base 01-05 Civic EP3 (Type S or K24 Swap) Note: *Will NOT fit RHD cars or RWD cars. Features: All plugs included except EVAP and ACCovering is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F) SAE Certified Automotive Grade WiringAll plugs are labeledTucked designHarness runs over valve cover (Can be covered with coil pack cover)Injector wiring runs from under manifold between middle runners.Ground wire relocated to stud under coil pack cover (instead of front of the valve cover)Includes single wire temp sensor wire (For k-swap cars stock cluster)3 Aux wires run from ECU to under intake manifold. Two ECU pins pre-installed.Wiring long enough for both VSS low frequency or high frequency (High Frequency transmissions will require repining plug and slight modification to VSS)Each harness is inspected and tested before shipping.RSX injectors plugs come standard Shipping PolicyPayment MethodReturns PolicyFAQShipping Policy -Please leave us your full name, your telephone number and detailed address when ordering. -We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order. -We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition. Payment Method -We accept PayPal only. -All major credit cards are accepted through secure payment processor PayPal. -Payment must be received within 4 business days of auction closing.Returns Policy -We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price. -With these parts you can replace your defective parts simply plug and play. -Our warranty is valid for max. 24 months without mileage limitation. -Please compare carefully with Photos or OE number before purchasing the part. -Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.FAQ On Sep-21-21 at 18:45:12 PDT, seller added the following information:
Price: 61.99 USD
Location: Chino, California
End Time: 2024-12-22T02:40:39.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Features: without vtec connector
Brand: OE QUALITY
Manufacturer Part Number: TUCK-K20-BUDGET
Type: K-Series Tucked Engine Harness
Interchange Part Number: k24 k24a2 i vtec type s, K20a2
Superseded Part Number: NOT fit RHD cars or RWD cars.
Weight: 1.25kg
UPC: Does not apply
Warranty:: 2 Year
L x W x H: 36.5x 30 x 6